Die Casting Machine
Model No.:JM-DC-25T
Parameters
| Specification | Model:JM-DC-25T |
| Locking force | 250kN |
| Tie-bar diameter | 45mm |
| Die stroke | 135mm |
| Distance between tie-bar | 278X232mm |
| Die height(min.~max.) | 150-220mm |
| Injection force(max.) | 30KN |
| Plunger stroke | 120mm |
| Plunger diameter | 42mm |
| Injection pressure | 24MPa |
| Maximum molding area | 120cm2 |
| (Zn) Effective shot weight | 0.5kg |
| Shotting position | center |
| Traverse stroke | 152mm |
| Pneumatic knock-off stroke | 220mm |
| Ejection force | 20kN |
| Dry cycle time | 4.5sec |
| Flow rate of pump | 31L/min |
| Working oil-pressure | 8MPa |
| Output of pump motor | 5.5/4kW/P |
| Melting pot capacity(Zn) | 160kg |
| Accumulator capacity | 10L |
| Oil tank capacity | 200L |
| Furnace fuel consumption | 2kg/h |
| Input of furnace heating | 12kW |
| Input of nozzle heating | 2kW |
| Machine dimension | 2850X1320X1800mm |
| Machine weight | 2TON |