Die Casting Machine
Model No.:JM-DC-18T
Parameters
| Specification | Model:JM-DC-18T |
| Locking force | 180kN |
| Tie-bar diameter | 40mm |
| Die stroke | 125mm |
| Distance between tie-bar | 278X232mm |
| Die height(min.~max.) | 150-220mm |
| Injection force(max.) | 19KN |
| Plunger stroke | 80mm |
| Plunger diameter | 38mm |
| Injection pressure | 17MPa |
| Maximum molding area | 88cm2 |
| (Zn) Effective shot weight | 0.28kg |
| Shotting position | center |
| Traverse stroke | 152mm |
| Pneumatic knock-off stroke | 220mm |
| Ejection force | 13kN |
| Dry cycle time | 3sec |
| Flow rate of pump | 25L/min |
| Working oil-pressure | 7MPa |
| Output of pump motor | 5.5/4kW/P |
| Melting pot capacity(Zn) | 90kg |
| Accumulator capacity | 10L |
| Oil tank capacity | 200L |
| Furnace fuel consumption | 1.5kg/h |
| Input of furnace heating | 10.5kW |
| Input of nozzle heating | 1.5kW |
| Machine dimension | 2800X1320X1700mm |
| Machine weight | 2TON |